Thursday, December 24, 2015

Merry Christmas!

Merry Christmas! I hope that you are able to spend some time with your family and friends!


There are many projects to come on the blog for the upcoming year!

Sunday, December 6, 2015

Meet Frankie and Ana White's Alaskan Vacation Giveaway

I have been slacking when it comes to projects for the past few months. If you follow me on Instagram, you know that it is because this guy came into my life.
Picture from Garlind Ridge Collies
His name is Frankie and he is a collie puppy. I love him to death, but he makes doing any kind of project near impossible. He is into everything and he definitely keeps me on my toes. I promise that I have ideas for some new projects and I will be working on them soon.

I don't have a new project for you today, but I do have to tell you about an amazing giveaway!

I first tried my hand at woodworking about 3.5 years ago. I usually make the gifts that I give my family. I needed an Easter present for my 3 nieces. I found Ana White's website and I decided to try making these beach chairs. I had fun making them and the kids really liked them. From that point, I was hooked on woodworking!
Since then, I have built several projects from her website and book. Here are just some of them. I have more, but I don't want this post to go on forever!
Working on these projects actually inspired me to make a few of my own plans. Some of them can be found on this blog. Not only does Ana White build furniture, but a couple years ago she built a duplex from the ground up and this year she built a cabin in the middle of nowhere! She is kind of my hero.  

Her family is actually going to be starring in diy Network's Building Off the Grid - Alaska Range. It premieres December 15th. To celebrate the premiere, Ana White is giving away an Alaska Dream Vacation. If you win, you even get to stay in the cabin that they built on the show! This was Frankie's reaction to the giveaway. He was pretty shocked!
You can check out the details of the giveaway at www.ana-white.com/win. Even if you don't win, be sure to check out the show on the 15th!


Until the 15th comes around, I'm sure Frankie will be keeping me busy!
Oh! I better mention that I am not affiliated with Ana-White.com. I am not being paid for this post and all opinions in this post are completely my own.

Monday, October 5, 2015

Scrap 2x4 Halloween Monsters


I wanted to make some new Halloween decorations, and I wanted them to be fast and easy to make. I decided to make these little monsters out of scrap 2x4 blocks. I had all the supplies on hand, so they were completely free!

Needed Materials:
Scrap Wood Blocks - I used scrap 2x4s and 1x2s, but you could use 2x3s, 2x6s or any other scrap wood you have laying around.
Paint
Wood Glue
Scraps of fabric (for the mummy)

Here is how I made each of my monsters.

Step 1: Cut your wood
You can cut your blocks to be whatever size you want. I rummaged through my scrap bin and used scraps that were 3"-5".


Step 2: Sand
Ensure that everything is sanded smooth.


Step 3: Paint
I did not use any kind of template. I just drew on a design with pencil and then painted it. You could also do a search for templates and then trace them on.

Step 4: Glue on extra parts (if applicable)

Step 5: Enjoy your Bootiful Halloween decorations!

Frankenstein

Use your wood block and cut two small blocks from a 1x2 for the bolts. You could also use a dowel, screws, or bolts.

Mummy

Use your wood block and paint on the eyes. Then, wrap the scrap fabric around the board, gluing it on as you wrap. I tore strips from an old pillow case, but any kind of scraps that you have laying around would work.

Jack-O'-Lantern

Use your wood block and cut a small block from a 1x2 for a stem. You could also use a dowel or even a stick.

Ghost

Nothing extra is needed for this one. Just paint it!

Black Cat

Use your wood block and cut two triangles from a 1x2 for ears. The eyes I painted are not the greatest, but they work for me. I had originally painted on a nose, mouth, and whiskers on my cat. But then it looked too friendly, so I painted over them. Now I think it looks like Batman. Oh well, he is kind of scary, too!

These scrap 2x4 Halloween monsters are inexpensive, quick, and easy to make. They would make a great kid's project. The kids could personalize the monsters anyway that they want.


Monday, August 31, 2015

Knit Operation Gratitude Scarf

The company that I work for encourages the employees to volunteer. Every month or so, a group of knitters and crocheters choose an organization to make items for. Last month, we made item for Operation Gratitude.

Operation Gratitude sends care packages to Veterans, Wounded Warriors, First Responders, and U.S. Service Members that are deployed overseas. They accept many different types of donations, including hand-made scarves and hats.

I decided to make a textured diagonal scarf. This pattern is very simple, yet looks nice. Operation Gratitude accepts any pattern, as long as it is 5"-6" wide and about 48" long. They also prefer subtle colors.



If you would like to learn more about Operation Gratitude or how you can help, be sure to check out the website operationgratitude.com. If you are interested in making a knit or crocheted item, be sure to check out their specific requirements.

If you want to see more of my other knitting and crocheting projects, check out my Ravelry project page.

Sunday, August 16, 2015

DIY Kid-Sized Adirondack End Table

My brother recently moved into a new house. I wanted to make a little something for the two kids. I made this cute Adirondack set.


I built the two chair's and table using Ana White's plans. I built one of these chairs last year for a charity event. If you want to see the details for that, check out my Building a Kid-Sized Adirondack Chair for Charity post.

Here are the steps that I took to build this end table.


Needed Materials:
1 - 2" x 2" at 6 feet
2 - 1" x 3" at 6 feet
1 - 1" x 2" at 3 feet
1 1/4" Kreg pocket hole screws
1 1/2" Finishing nails
Wood glue
Paint or Stain

Needed Cuts:
4 - 2" x 2" cut at 17 1/4" (legs)
4 - 1" x 3" cut at 9 1/2" (aprons)
2 - 1" x 2" cut at 9 1/2" (side supports)
1 - 1" x 2" cut at 10 1/4" (stretcher)
5 - 1" x 3" cut at 14 1/2" (slats)

Step 1: Make the cuts. I used my miter saw for all my cuts.


Step 2: Drill pocket holes into each end of the 4 aprons, 2 side supports and the stretcher.


Step 3: Using the pocket hole screws and wood glue, attach the aprons to the legs.


Step 4: Using the pocket hole screws and wood glue, attach the side supports to the legs.


Step 5: Using the pocket hole screws and wood glue, attach the stretcher to the side supports.


Step 6: Using the finishing nails and glue, attach the slats to the top.


Step 7: Fill the pocket holes with putty and sand everything.


Step 8: Paint or apply finish of your choice. I used Rustoleum spray paint.


Step 9: Enjoy! To give you an idea of size, my nephew and niece are 1 and 4 years old.


You can find more details and the full plans to build this Adirondack end table on the Ana White website.

Thursday, June 25, 2015

DIY Wood Rocker

My one year old nephew came to stay with me for a little while. I made him a few toys to play with while we were together. He loves to rock, so I made him this little rocker.



I found the pattern on the Ramblings from the Burbs blog way back in March of last year. You can find the template and some great tips on her blog. Here are the steps I took to make mine.

Needed Materials:
2'x4' 1/2" Plywood
2 - 1"x4"
1" Kreg Pocket Hole Screws
Wood Glue
Paint or Stain

Needed Cuts:
9 - 1"x4" cut at 13.5" (slats)
Template from the Ramblings from the Burbs blog (rocker)

Step 1:
Copy the template onto your wood.
Step 2:
Make the cuts. I used my miter saw to make the slats.

I used my jigsaw to make the rockers.
I used a hole saw to make the initial hole for the hand holds. If you don't have a hole saw, just use the largest drill bit you have and then put the jigsaw blade in the hole to cut out the hand holds.
Step 3: Make the pocket holes. Set your Kreg Jig at the 5/8 marking and drill into each end of the slats.


Step 4: Sand everything well. I usually wait until everything is built before I sand, but I wanted to paint before it was assembled.
Step 5: Paint or apply finish of your choice. I used Rustoleum Ultra Cover paints and I sealed it with Rustoleum Clear Gloss spray paint.
Step 6: Mark the locations of the slats (optional).
You may want to place marks on the rockers at the locations that you want to place the slats. I did not do this, but I wish I would have. My rocker is not exactly even because I did not do this.

Step 7: Using 1" Kreg screws and wood glue, attach the slats to the rockers. I started in the middle and worked outward on each side. I did not measure, but I placed them about 3/4" in from the base of the rockers. Be sure that you attach the slats so that they are at the same place on each rocker. This is where the marks would have come in handy.
Step 8: Fill the pocket holes with putty (optional).
I filled my pocket holes, sanded, and did paint touch ups. You could also skip this step and leave the holes.

Step 9: Enjoy!
I am so glad I finally got around to building this! You can not only rock in it.
You can use it as a tunnel.
You can play peek-a-boo.
You can climb on top of it.
It can even be turned on it's side and imagined that it is an ice cream stand, check out, puppet stage, etc.
This would be an easy gift to make for any little one in your life!