Tuesday, December 13, 2016

DIY Polar Express Inspired Shadow Box

If you have someone in your family that loves The Polar Express movie, then this could be the perfect gift for them! It is easy and inexpensive to make. I actually used scrap wood to make mine. The only thing I needed to purchase was the bell.

Here are the steps to take to make one.

Needed materials:
  • 1/8" Plywood scrap
  • 1" x 4" Board
  • Wood Glue 
  • Finishing nails
  • Bell
  • Ribbon
  • Twine or String
  • Paint for the background
  • Paint Marker
  • Paint or Stain for the frame
Step 1: Cut your plywood. I used a piece of scrap that was about 8" x 10". 
You could use any size that you have on hand.

Step 2: Cut your 1" x 4" boards to fit the size of your plywood. Bevel the ends at 45 degrees. Optionally, you could just cut the ends square.


Step 3: Paint your plywood. I used Black for my background.

Step 4: Using a paint marker, write your message.

Step 5: Glue and clamp your frame. You could also use finishing nails.

Step 6: Sand the frame.

Step 7: Paint or stain the frame. I wanted to give mine a weathered wood look. So, I first painted it a Nutmeg color.

Then, I painted over the Nutmeg with an Antique White.

After the paint dried, I sanded off some of the white paint to create the weathered look.


Step 8: Tie the twine to the bell and make a small bow. I secured the bow with a dab of hot glue.

Step 9: Put the wood glue around the border of the background. At the same time, decide where you want to place the bell.

Step 10: With the bell in place, nail the background to the frame. You may want to also secure the bell to the back to ensure it stays put.

Step 11: Enjoy your shadow box!